1967-1969 Mustang Disc Brake Conversion Kit Builder

1967-1969 Mustang Front Disc Brake Conversion Kit

This kit must be installed on V-8 Spindles.  

Kit includes:

• 11" Plain Vented Rotors
• 4 Piston Kelsey Hayes Style Calipers
• Rubber Brake Hoses
• Caliper Brackets
• All Mounting Hardware
• Bearings & Seals
• Must use V8 Spindles

Mustang Application Notes:

• Works with 1964-1969 V8 drum brake Mustang spindles.
• Also fits 1967-1969 V6 Mustang spindles but converts the vehicle to 5 lug.
• Will not retain the original bolt pattern if used with v-6 spindle.

 Front Disc Brake Kit Instructions

1967-1969 Mustang Rear Disc Brake Conversion Kit  
( Option at checkout )

The Pirate Jack Classic Mustang Rear Disc Brake Kit provides an easy to install, 
bolt on solution for upgrading your Mustang Ford passenger car 9” rear-end.

• Pirate Jack's kit is unique in that it provides all the brackets and flanges 
  that fit the three most popular sizes of the 9” rear end 
  (3-3/8” x 2”, 3-1/2” x 2-3/8”, 3-9/19” x 2” ). 
  

Includes:

• 11" Standard Vented Rotors
• Standard Large Bore GM  Calipers w/ E brake Option
• E-Brake Cables
• All brackets & Hardware to install.
• Standard Rubber Brake Hoses!!!
• Drilled for both Ford 5x4.5 Using 1/2" Studs or GM 5x4.75

The Ford 9" Rear Disc Brake Conversion Kit will fit 1965-1973 Mustangs
with a 9" Small Bearing Rear Axle.

Does not fit 14" rims.

• Maximum diameter of 6.11" to fit rotor hat.
• .050x45 Degree Chamfer. 2.786" max register axle.
  
  

     Rear Disc Brake Kit Instructions
  Rear Kit User Submitted Video

Ford Mustang Cougar Shelby, Boss 302 Manual or Power
Master Cylinder Kit 

( Option at checkout )

Description:


New Ford Style Master Cylinder

•     1"  Bore for Disc/ Drum Brakes
•     1/2-20" & 3/8-24" Ports on left Side only
•     Master has a piston adapter that will allow with
      power booster or manual application.
•     Bottom Mount Universal Disc Drum Proportioning Valve Kit
•     Includes Pre-bent Lines to Master Cylinder
•     Zinc Bottom Mount Bracket
•     Mounting Hardware

( Option at checkout )

Description:

This kit will only work with automatic transmissions only.

Your Mustang will not only stop on a dime, but under the hood it will really shine 
with this classy looking booster conversion kit. 

This power brake unit is unique in style, combining a Black Powder Coated
7" single diaphragm power booster with abrand new 1" bore Ford style
master cylinder & built in residual valve,this unit will give you additional
assist and stopping power making your 

Mustang a much safer and enjoyable car to drive.

We take pride in providing you the kind of quality of parts
that street rod builders and professionals appreciate!!! 

1967-1970 Ford Mustang Booster Conversion Kit (Disc/Drum)

•     9” Black Mustang Booster w/ Firewall Plate
•     1"  Bore Master Cylinder
•     2227161 Casting Number with “Teardrop” Markings
•     1/2-20" & 3/8-24" Ports on left Side only
•     Bottom Mount Universal Disc Drum Proportioning Valve Kit
•     Includes Pre-bent Lines to Master Cylinder
•     Built in Residual Valve for Rear Brakes
•     Zinc Bottom Mount Bracket
•     Mounting Hardware
•     Power Brake Disc/Drum Brake Pedal w/ Pedal Pad
•     For automatics only