1967-1969 Chevy Camaro Power Disc Brake Conversion and Tubular Control Arm Set

1967-1969 Chevy Camaro Power Front Disc Brake Conversion Kit with Tubular Upper & Lower Control Arms

(DBK6472-GM-227-CA2)

New brakes, new stance, one box.

This complete Pirate Jack kit converts your first-gen Camaro from front drums to power disc brakes and swaps in a full set of tubular upper and lower control arms at the same time. You get 11" rotors, GM calipers pre-loaded with pads, spindles, an 11" power brake booster, a double bail cast iron master cylinder and a proportioning valve with lines. The tubular lower arms also lower the car about 2", so you upgrade your brakes and your stance in one install. Every part is brand new. Nothing is rebuilt or remanufactured.

• 1967-69 Camaro power front disc brake conversion with 11" rotors and pre-loaded GM calipers
• Complete set of tubular upper and lower control arms with bushings
• Lower control arms drop the front of the car about 2"
• 11" power brake booster, double bail cast iron master cylinder and proportioning valve with bracket & lines

Upgrade Brakes and Suspension Together

With the front end apart for a disc conversion, it's the perfect time to replace tired factory control arms. This kit includes a complete set of tubular upper and lower arms with bushings, so you're not stuck reusing 50-year-old stampings. The lower arms lower the car about 2" for a more aggressive stance.

Complete Power Brake System

The 11" power brake booster gives you strong power assist and a firm, easy pedal. It's paired with a double bail cast iron master cylinder for a classic look and a proportioning valve with its bracket and lines included, so the whole system is ready to plumb.

Kit Includes

Front Disc Brakes

• 11" rotors (pair)
• GM calipers, pre-loaded with pads (pair)
• Caliper brackets & backing plates (pair)
• Spindles (pair)
• Rubber brake hoses with banjo bolts (pair)
• Bearings, seals, dust caps, spindle nuts, spindle washers & all hardware

Suspension

• Tubular upper control arms with bushings (pair)
• Tubular lower control arms with bushings (pair), lowers the car about 2"

Power Brake Components

• 11" power brake booster
• Double bail cast iron master cylinder
• Proportioning valve with bracket & lines

Fitment

Don't see your car? Call us at 866-601-4455 before ordering.

Before You Order

• Ride height: The tubular lower control arms lower the front of the car about 2". Plan your alignment and tire clearance accordingly.
• Wheels: Disc brake conversions typically need 15" or larger wheels and push each wheel out about 1/4" to 3/8". Check fender and tire clearance.

Free Tech Support

Have a question before or after your purchase? Call our tech team at 866-601-4455.

• Monday-Friday, 8:00 AM - 4:00 PM EST
• Limited weekend availability

Power disc brakes and tubular control arms for your 1967-69 Camaro in one kit. Order yours from Pirate Jack today.