Front Braided Stainless Brake Hose - 7/16"

HSDBK-SS Pair – 18" Stainless Steel Braided Front Brake Hoses w/ 7/16" (12mm) Banjo

Firmer pedal, cleaner look: the hose we use on most of our front disc brake kits.

Your brake hoses do one critical job: carry pressure from the hard lines to the calipers without stretching. Over time, standard rubber hoses swell under pressure, which robs you of pedal feel and stopping power. The HSDBK-SS pair replaces them with braided stainless steel hoses that resist that expansion, so more of your pedal effort goes straight to the calipers.

These are the same 18" banjo-style hoses we use on most of our front disc brake kits. They’re a proven, direct match for the setups we sell every day.

Braided stainless steel for a firmer pedal
A stainless steel braid wraps the hose, limiting swelling under hard braking. You feel it right away in a firmer, more responsive pedal, and it stays consistent stop after stop. The braid also protects the hose from road debris and abrasion and keeps its sharp look for years.

Banjo end for a clean caliper connection
The caliper end has a straight banjo fitting sized for a 12mm or 7/16" banjo bolt. That’s the most common setup on our front disc brake kits, and it gives a compact, leak-free connection right at the caliper.

Standard 3/8"-24 inverted flare at the frame
The other end has a straight 3/8"-24 inverted flare female fitting. It connects directly to standard 3/16" hard brake lines, the most common size on American cars and trucks.

18" long for room to move
At 18" long, the hoses give plenty of slack for steering lock and suspension travel on most cars and trucks, including many lowered or modified builds.

Fully assembled, ready to install
Both hoses come fully assembled and ready to bolt on, with no crimping or assembly needed.

Features

• Braided stainless steel construction for a firmer pedal
• Resists swelling under pressure for consistent braking
• Straight 12mm / 7/16" banjo fitting at the caliper
• Straight 3/8"-24 inverted flare female fitting at the hard line
• 18" overall length
• Fully assembled
• Sold as a pair (left and right)
• The same hoses used on most of our front disc brake kits

Specifications

• Part number: HSDBK-SS Pair
• Part type: Brake hose
• Length: 18"
• Hose end 1: 3/8"-24 inverted flare, female threads, straight
• Hose end 2: 12mm or 7/16" banjo, straight
• Outer material: Braided stainless steel
• Assembled: Yes
• Quantity: Sold as a pair

What’s included

• (2) 18" stainless steel braided brake hoses

Please note: Measure before ordering to make sure 18" is the right length for your vehicle. Check that your caliper uses a 12mm or 7/16" banjo bolt and that your hard lines use 3/8"-24 inverted flare fittings.