Close

Site Information

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12

Wilwood Front & Rear Disc Kit 1964-72 GM A Body Booster Conversion Control Arms

$1,951.00
SKU:
DBK64721012LXW-B-WIL-706-UCALCA6472
Condition:
New
Shipping:
Free Shipping. Faster Options Available At Checkout.
Quantity:

Reviews:

Product Description

 

Item Description

 

 

This disc brake kit will fit the following GM, A, F, X Body Cars:

1964-1972 A-BODY: Chevy Chevelle, Chevy El Camino, Chevy Monte Carlo, Oldsmobile Vista Cruiser, Oldsmobile Cutlass, Oldsmobile 442, Oldsmobile F-85, Pontiac Tempest, Pontiac LeMans, Pontiac GTO, Buick Special, Buick Skylark.

Complete Disc Brake Conversion Kit:

  •     11" Cross Drilled & Slotted Rotors Front & Rear (5x4.75 pattern)
  •     Front Dual Piston Wilwood Black Calipers 120-10937 -BK (Wilwood D-52 Brake Pad)

  •     Rear GM Powder coated E-Brake calipers large bore single piston (not wilwood)
  •     Front & Rear Caliper Brackets 

  •     Front Dust Shields
  •     Stock Height Coated Spindles
  •     Front & Rear Stainless Steel Braided Brake Hoses, with Banjo Bolts & Copper Crush Washers!!! ($50 Value Often Not Included in Other Listings)
  •     Bearings, Seals, Dust Caps, Spindle Nuts, Spindle Washers and all Hardware

  •     Set of emergency brake cables

  •     Does not fit Moser Rear Ends

  •      Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer. 2.786" max register axle

  •     8" Dual powder coated black power brake booster
  •    Upper and lower control arms with drop pocket.May drop car 1-2" depending on weight of vehicle and spring type. Shims are included to raise vehicle back to stock if needed. Set includes all four arms for upper and lower arms.

  •     Pedal rod & attachments

  •     Firewall brackets

  •     Adjustable proportioning valve (Will need to install in rear line 3/8" fittings included with the valve


    ALL BRAND NEW PARTS! NOTHING REBUILT OR RE-MAN!!!


NO MODIFICATIONS, ONLY FOR USE FOR 15" OR  LARGER WHEELS!
FREE TECH SUPPORT AND DVD AVAILABLE WITH EACH KIT UPON REQUEST!
 


Does not include brake lines. You will need to re flare and add lines to the vehicle to connect to the master cylinder.

More info about the front kit:

The front GM A, F, X Body disc brake kit allows an easy solution to convert your drums to disc. Everything included in one kit. The spindles are stock height and will not change the ride height. Your rims need to be 15" or larger or the kit will have clearance issues that you'd have to work around. Disc brake conversions typically create an offsets of 1/4" to 3/8" 

About the Wilwood Calipers:

Wilwood#120-10937-RD

D52 Dual Piston Caliper

2" Diameter Pistons

1.28" Rotor Width

Wilwood's D52 caliper is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put and end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 brake calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track.

 

D52 performance brake calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE banjo bolt brake line. mounting. Calipers can be used with most wheels that clear the OE calipers. The Rear calipers with 1.25" piston provide 2.46 cubic inches of piston area per caliper, to maintain the original front to rear brake bias and use of the OE master cylinder.

More info on the Rear Kit

  •     Does not fit MOSER Rear Ends
  •  
  •     Works on C-Clip or non C-Clip rear ends.
  •     Each rotor is drilled for GM 5 x 4.75'' w/ 7/16'' stud bolt patterns. 

  •     Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer. 2.786" max register axle.

  •     Fits 15" or larger rims

  •     Double check the ends of your axle before ordering. Some 10/12 rear ends will have to modify the axle or rotor opening to get the rotor to fit.

Does not fit the S10 Chassis or any other truck or full Size cars. All disc brake kits will move your rim out toward the fender of the car up to 3/4" depending on your style rims. It is hard to say how much total offset it will be as 
all rims are not standard.


About the Wilwood Master:

 

Additional Dimensions
Overall Length(in): 8.76"
Flange to End Length (in): 8.15"
Inlet Size (in):  
Inlet Fit (in):  
Outlet Size 1 (in): 1/2-20
Outlet Fit 1 (in): 3/8-24 IF or 1/2-20 IF
Outlet Size 2 (in): 1/2-20
Outlet Fit 2 (in): 3/8-24 IF or 9/16-18 IF

 


CHECK OUT OUR STAINLESS STEEL HOSES A $50 DOLLAR VALUE THAT COME INCLUDED IN THIS KIT! MOST  LISTINGS DON'T INCLUDE THEM AND YOU WILL HAVE END UP PURCHASING SEPARATELY.

Easy Install Disc Brake Conversion, Watch the installation video below & feel free to contact us if you have any questions. We offer free tech support with every order!!!

 

 

 

Other Details

Brand:
Wilwood / Pirate Jack
Manufacturer Part Number:
DBK64721012LXW-B-WIL-xxx
Interchange Part Number:
120-10937-BK
Placement on Vehicle:
Front
Surface Finish:
Powder Coated Calipers
Warranty:
1 Year
Country/Region of Manufacture:
China
Item Description:
Disc Brake Conversion Kit w/ Blk Wilwood Calipers
Applications:
Fits GM A Body 1964-72
Rotor Dimension:
11" OD. with 5x4.5 Bolt Pattern 1.28" Rotor Width
Calipers:
Wilwood 120-10937-BK Calipers D-52 Type
OE Spec or Performance/Custom:
Performance/Custom
Other Part Number:
UCALCA6472
Fitment Type:
Performance/Custom
Brake Disc Style:
Drilled & Slotted

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!