null
Close

Site Information

★ VETERANS DAY SALE · THANK YOU FOR YOUR SERVICE · 10% OFF WITH CODE VETS10 · ENDS SUNDAY 11/15 ★
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12

1973-87 Chevy / GMC 14-Bolt Full-Float SRW Rear Disc Brake Conversion with Master Cylinder & Proportioning Valve, Non E-Brake | Pirate Jack | DBK14CT-NE~MC

$684.95
SKU:
DBK14CT-NE~MC
Shipping:
Free Shipping. Faster Options Available At Checkout.
Quantity:

Reviews:

Product Description

1973-1987 Chevy / GMC 14-Bolt Full-Float SRW Rear Disc Brake Conversion Kit with Master Cylinder & Adjustable Proportioning Valve, Non E-Brake

1973-87 3/4 & 1-Ton · Full-Float 14-Bolt · Single Rear Wheel · Black Hat Rotors · 1.25" Bore Disc/Disc Master · Adjustable Valve · Part # DBK14CT-NE~MC

Ditch the heavy, worn-out drums on your full-float 14-bolt. This kit converts the 14-bolt single rear wheel axle found in 1973-1987 Chevy and GMC 3/4-ton and 1-ton trucks to disc brakes, with laser-cut brackets, rotors, calipers, pads, hoses and hardware. It is lighter and simpler than drums, and often costs less than rebuilding a drum setup.

This package also includes a 1.25" bore cast iron disc/disc master cylinder and an adjustable disc/disc proportioning valve kit, so your hydraulics are set up for four-wheel discs from day one. It is a non e-brake kit.

What's Included

Rear Disc Brake Conversion

  • (2) Laser-cut black disc brake mounting brackets with Grade 8 hardware
  • (2) New black powder coated calipers with built-in parking brake mechanism
  • (2) Rubber brake hoses (3/8"-24 inverted flare) with banjo fittings
  • (2) Black hat rotors
  • (4) Brake pads
  • (2) Weld-on brake line tabs & brake line clips

Hydraulics

  • 1.25" bore cast iron master cylinder for disc/disc
  • Adjustable proportioning valve kit, disc/disc

Why Upgrade?

  • ✔ Lose the drums: lighter, simpler and easier to service than factory drum brakes.
  • ✔ Laser-cut brackets: black finish with Grade 8 hardware.
  • ✔ Black hat rotors: look great and keep rust from building up on the hub and wheel.
  • ✔ Clean and simple: a straightforward bolt-on rear disc setup.
  • ✔ Hydraulics included: a disc/disc master cylinder and adjustable proportioning valve to balance your new rear discs.

Fitment

MakeApplicationYears
Chevrolet / GMC3/4-ton & 1-ton trucks with full-float 14-bolt single rear wheel (SRW) axle, drum mounted behind the hub1973-1987

Don't see your truck? Contact us before ordering.

Before You Order: Please Read

  • No parking brake: installing this kit removes the factory emergency brake cables. The parking brake lever will no longer work.
  • Single rear wheel only: for full-float 14-bolt SRW axles. Not for dually hubs or semi-float axles.
  • Drum behind the hub only: fits the older style where the drum mounts behind the hub. If your drum slips over the outside of the hub (newer style), this kit will not fit.
  • Check your axle: count the differential cover bolts. 14 bolts = 14-bolt (fits). 10 bolts = Dana and 12 bolts = Sterling 10.25 (do not fit). From the 4-bolt backing plate flange to the back of the hub where the wheel studs press through should measure about 4-11/16".
  • Rear wheels: requires 15" steel wheels with 4" backspacing, or larger aluminum wheels, for caliper clearance.

Installation Notes

  • Rotor studs should drop freely through the rotor. Avoid press-fit; oversized studs may require drilling the rotor stud holes.
  • Make sure you have at least 5/8" of lug nut engagement.
  • An adjustable proportioning valve is highly recommended to balance front and rear braking.
  • Remove any residual pressure valves from the rear circuit to prevent brake drag.
  • Bench bleed the master cylinder before installation, then set the proportioning valve for balanced front/rear braking.

Related Kits

Free Tech Support

Every order comes with free tech support before and after your purchase. Call 866-601-4455.

  • Monday-Friday, 8:00 AM - 4:00 PM EST
  • Limited weekend availability

Rear discs plus the master and valve to run them. Order your 14-bolt package today.


Other Details

Placement on Vehicle:
Rear
Fits:
1973-87 Chevy/GMC 3/4 & 1-Ton 14-Bolt Full-Float SRW
Brand:
Pirate Jack
Manufacturer Part Number:
DBK14CT-NE~MC

Find Similar Products by Category

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!