null
Close

Site Information

★ VETERANS DAY SALE · THANK YOU FOR YOUR SERVICE · 10% OFF WITH CODE VETS10 · ENDS SUNDAY 11/15 ★
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5

1973-87 Chevy / GMC 3/4 & 1-Ton 14-Bolt Full-Float SRW Rear Disc Brake Conversion Kit | Pirate Jack | DBK14CT

$549.95
SKU:
DBK14CT
Shipping:
Free Shipping. Faster Options Available At Checkout.
Quantity:

Reviews:

Product Description

1973-1987 Chevy / GMC 3/4 & 1-Ton 14-Bolt Full-Float SRW Rear Disc Brake Conversion Kit

1973-87 3/4 & 1-Ton · Full-Float 14-Bolt · Single Rear Wheel · Black Hat Rotors · Black Calipers · Part # DBK14CT

Ditch the heavy, worn-out drums on your full-float 14-bolt. This kit converts the 14-bolt single rear wheel axle found in 1973-1987 Chevy and GMC 3/4-ton and 1-ton trucks to disc brakes, with laser-cut brackets, rotors, calipers, pads, hoses and hardware. It is lighter and simpler than drums, and often costs less than rebuilding a drum setup.

A great match for K20 / K25 4x4 builds, 2WD C20 / C30 trucks and Suburbans with the full-float 14-bolt.

What's Included

  • (2) Laser-cut black disc brake mounting brackets with Grade 8 hardware
  • (2) New black powder coated calipers with built-in parking brake mechanism
  • (2) Rubber brake hoses (3/8"-24 inverted flare) with banjo fittings
  • (2) Black hat rotors
  • (4) Brake pads
  • (2) Weld-on brake line tabs & brake line clips

Why Upgrade?

  • ✔ Lose the drums: lighter, simpler and easier to service than factory drum brakes.
  • ✔ Laser-cut brackets: black finish with Grade 8 hardware.
  • ✔ Black hat rotors: look great and keep rust from building up on the hub and wheel.
  • ✔ Clean and simple: a straightforward bolt-on rear disc setup.

Fitment

MakeApplicationYears
Chevrolet / GMC3/4-ton & 1-ton trucks with full-float 14-bolt single rear wheel (SRW) axle, drum mounted behind the hub1973-1987

Don't see your truck? Contact us before ordering.

Before You Order: Please Read

  • Single rear wheel only: for full-float 14-bolt SRW axles. Not for dually hubs or semi-float axles.
  • Drum behind the hub only: fits the older style where the drum mounts behind the hub. If your drum slips over the outside of the hub (newer style), this kit will not fit.
  • Check your axle: count the differential cover bolts. 14 bolts = 14-bolt (fits). 10 bolts = Dana and 12 bolts = Sterling 10.25 (do not fit). From the 4-bolt backing plate flange to the back of the hub where the wheel studs press through should measure about 4-11/16".
  • Rear wheels: requires 15" steel wheels with 4" backspacing, or larger aluminum wheels, for caliper clearance.
  • Parking brake: the calipers have a built-in parking brake mechanism. An emergency brake cable kit is not included with this kit; for one that includes it, see DBK14CTLX-B or DBK14CTLX-R.

Installation Notes

  • Rotor studs should drop freely through the rotor. Avoid press-fit; oversized studs may require drilling the rotor stud holes.
  • Make sure you have at least 5/8" of lug nut engagement.
  • An adjustable proportioning valve is highly recommended to balance front and rear braking.
  • Remove any residual pressure valves from the rear circuit to prevent brake drag.
  • Torque lug nuts to factory spec and bed in the new pads before heavy use or towing.

Related Kits

Free Tech Support

Every order comes with free tech support before and after your purchase. Call 866-601-4455.

  • Monday-Friday, 8:00 AM - 4:00 PM EST
  • Limited weekend availability

Ditch the drums on your 14-bolt. Order your DBK14CT rear disc conversion today.


Other Details

Placement on Vehicle:
Rear
Fits:
1973-87 Chevy/GMC 3/4 & 1-Ton 14-Bolt Full-Float SRW
Brand:
Pirate Jack
Manufacturer Part Number:
DBK14CT

Find Similar Products by Category

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!