1968-69 Camaro/ Firebird Front Rear Disc Conversion w/ Suspension Package & Chrome Power Conversion Kit, Featuring Wilwood Components

1968 & 69 CAMARO RED WILWOOD CALIPER DISC BRAKE KIT CONTROL ARMS & ADJUSTABLE COIL OVER KIT

• • Front Coil Over Suspension, Dbl Adjustable 0.0-2.0" for Small Block
  • Rear Shocks
  • Drilled & Slotted 11" Rotors
  • Front Red Wilwood Dual Piston Aluminum Calipers
  • Large GM (Not wilwood) Single Bore Powder Coated Red Calipers w/ E-brake
  • Stainless steel braided brake hoses.
  • Front & Rear Caliper Brackets
  • Front Backing Plates
  • Stock Height Spindles
  • High Quality Rubber Brake Hoses, Banjo Bolts, & Copper Crush Washers
  • Bearings, Seals, Dust Caps, Spindle Nuts, Spindle Washers & all Hardware.
  • Tubular 4 piece Upper & Lower Control Arms Included
  • Improved suspension geometry
  • Provides additional built in positive caster which improves your handling
  • Urethane bump stops to provide ball joint protection
  • No modifications required to install the control arms
  • Control arm bolts not included please retain your old ones.
  • Complete factory replacement
  • Low drag and self lubricating properties for a bind free operation
  • Bushings do not squeak and are high wearing
  • Control arms come powder coated with new hardware
  • Lowers are 1.625 OD - .156 wall DOM tubing
  • Uppers are 1.125 OD - .125 wall DOM tubing
  • The upper arms have 4 degrees of positive caster, lowers are stock
  • These will work with stock/standard coil springs and even coil overs
  • 1-1/8" Bore Wilwood Polished Tandem Master Cylinder
  • Wilwood Adjustable Proportioning Valve w/ lines to master
  • 8" Dual Chrome Brake Booster 

***This kit is designed for rear staggered shocks. Look at your rear end before purchasing. Stock rear ends have one shock facing front of vehicle and one shock facing the rear. IE: Not parallel.***

    ALL BRAND NEW PARTS! NOTHING REBUILT OR RE-MAN!!!
ONLY FOR USE FOR 15" OR  LARGER WHEELS!