1966-74 Dodge Dart Mopar A-Body Front Disc Brake Conversion Kit for 5x4 Bolt Pattern & Manual Brakes

1966-74 Dodge Dart Mopar A-Body Std. Manual Master Front Disc Brake Conversion Kit for 5x4 bolt pattern. Allows you to maintain your stock upper control arms, saving your time & money! Our proprietary kit includes a special adapter/sleeve that will allow you to keep your stock arms. We also provide you the lower ball joints to change out, making this as complete a kit as possible. Also included is a period correct 4 bolt Bendix style manual master cylinder, linkage and push rod, and adjustable proportioning valve.

Complete Disc Brake Conversion Contains:

• 11" Rotors Standard Rotors, 5x4 Bolt Pattern
• New Single Piston Mid 70's Mopar Calipers, Slider Type
• D84 Brake Pads
• Robber Flex Line Hoses 
• Upper Crush Ball Joint Adapter Sleeves 
• Lower Ball Joints
• Hubs, Backing Plates
• Stock Height Spindles
•  Bearings, Seals, Dust Caps
• Spindle Nuts, Spindle Washers and all Hardware.
• Bendix Style; Near identical to original 2225621 with correct lid inscription 
• Manual Master Cylinder Rod Kit Included

***Fit's Most 14" Wheels. This kit will not fit the skinniest or most narrow 14" wheel that Mopar ever made. The measurement requirement are a minimum 13.25" overall inside diameter with at least a minimum of 4" backspacing. Anything less than that will not allow the calipers to clear the wheel. It's your responsibility to measure and know before ordering! Buyer is responsible for return shipping and 15% restock fee for any kit returned.***