1965-68 Chevy Impala High Performance 4 Wheel Disc Brake Conversion Kit

1965-68 Chevy Impala & Bel Air 4 Wheel Disc Brake Conversion Kit: Drilled & Slotted Rotors, Stainless Hoses 

1965-68 Impala / Impala SS / Bel Air / Biscayne · Front & Rear Discs · Drilled & Slotted Rotors · Stainless Braided Hoses · Part # DBK65681012LX

Ditch the drums at all four corners and stop like you mean it. This Pirate Jack kit converts your 1965-68 full-size Chevy to disc brakes front and rear, with 11" cross drilled & slotted rotors, large loaded GM calipers, and stainless steel braided hoses already in the box. The rear calipers keep a working emergency brake.

The front kit bolts to your stock drum brake spindles, so there's no change to your ride height. Every part is brand new. Nothing is rebuilt or remanufactured.

What's Included

Front Disc Brakes

• 11" cross drilled & slotted rotors (pair)
• Large loaded GM calipers with MKD-52 pads (pair)
• Caliper brackets (pair)

Rear Disc Brakes

• 11" cross drilled & slotted rotors (pair)
• Large loaded GM rear piston calipers with emergency brake and D154 pads (pair)
• Caliper brackets (pair)

Hoses & Hardware

• Stainless steel braided brake hoses with banjo bolts & copper crush washers
• Bearings, seals, dust caps, spindle nuts, spindle washers & all hardware

Why Buy This Kit

• ✔ Discs at all four corners for stronger, more even stopping than drums.
• ✔ Drilled & slotted rotors help shed heat and gas on hard stops.
• ✔ Stainless braided hoses included. They resist swelling for a firmer, more consistent pedal, and many kits make you buy them separately.
• ✔ Working emergency brake built into the rear calipers.
• ✔ Bolts to your stock spindles with no change to ride height.
• ✔ Easy replacement parts. Pads, rotors and other wear parts cross-reference at your local auto parts store. The part numbers are on page 2 of the instructions.

Fitment

Full-size Chevrolet only. This kit will not fit 1965-68 Pontiac, Buick or Oldsmobile full-size cars. There are substantial differences. Don't see your car? Contact us before ordering at 866-601-4455.

Before You Order: Please Read

• Wheel kit only: This kit does not include a master cylinder or proportioning valve.
• Brake system: You will need a disc/disc proportioning valve and a larger bore master cylinder to run 4 wheel discs. Make sure you have these, or add them from our store.
• Wheels: You need 15" or larger wheels.
• Wheel offset: This kit can move each wheel out up to 3/4". Check fender and tire clearance.
• Rear axle flange: The rear rotor hat fits axle flanges up to 6.11" diameter, with a 2.78" maximum register and a .050 x 45° chamfer. Measure your axle before ordering.

Optional Upgrades

• Full steel brake line kit
• Full stainless steel brake line kit

Ask us about line kits and other upgrades for this kit at 866-601-4455.

Free Tech Support

Have a question before or after your purchase? Call our tech team at 866-601-4455. Installation instructions and an installation DVD are available with each kit on request.

• Monday-Friday, 8:00 AM - 4:00 PM EST
• Limited weekend availability

Drilled & slotted discs at all four corners for your 1965-68 Impala. Order your kit from Pirate Jack today.