1959-64 Chevy Impala Bel Air Front Disc Brake Conversion Kit, 11" Rotors (DBK5964)

1959-64 Chevy Impala & Bel Air Front Disc Brake Conversion Kit: 11" Rotors, Bolts to Factory Spindles (DBK5964)

Convert the front drums on your 1959-64 Impala or Bel Air to 11" disc brakes with this complete front wheel kit. It bolts directly to your factory drum brake spindles, so your ride height doesn't change. Large loaded GM calipers clamp 11" rotors for a big step up in stopping power over the factory drums. Bearings, seals, caliper brackets and all the hardware are in the box. Every part is brand new. Nothing is rebuilt or remanufactured.

• 1959-64 Chevy Impala & Bel Air front disc brake conversion with 11" rotors
• Large loaded GM calipers with pads, ready to install
• Rubber brake hoses with banjo bolts & copper crush washers
• Bolts to your factory spindles with no change in ride height in the DBK5964 kit

Bolts to Your Factory Spindles

There are no new spindles to buy and no change to your stance. The caliper brackets mount right to your original drum brake spindles, and the kit includes new bearings, seals, dust caps, spindle nuts, spindle washers and all the hardware you need, so there's no hunting for small parts halfway through the install.

Simple, Proven Stopping Power

Front drums fade, pull and need constant adjusting. This kit replaces them with 11" rotors and large GM calipers that come loaded with pads, ready to bolt on. It's a straightforward, budget-friendly way to get dependable disc brakes on your full-size Chevy. Want more performance? Step up to our DBK5964LX with drilled & slotted rotors and stainless steel braided hoses.

Kit Includes

• 11" rotors (pair)
• Loaded large GM calipers with pads (pair)
• Caliper brackets (pair)
• Rubber brake hoses with banjo bolts & copper crush washers (pair)
• Bearings, seals, dust caps, spindle nuts, spindle washers & all hardware

Fitment

Will not fit 1959-64 Pontiac Bonneville, Grand Prix, Catalina or Ventura. Not sure? Call us at 866-601-4455 before ordering.

Before You Order

• Factory spindles only: This kit bolts to the factory drum brake spindles. It does not work with aftermarket 2" drop spindles.
• Wheels: You need 15" or larger wheels. This kit does not work with wire wheels.
• Master cylinder & valve required: You'll need a dual chamber master cylinder and a disc/drum proportioning valve to complete the install. They're not included in this kit.
• Wheel offset: Disc brake conversions typically push each wheel out about 1/4" to 3/8". Check fender and tire clearance.

Free Tech Support

Have a question before or after your purchase? Call our tech team at 866-601-4455.

• Monday-Friday, 8:00 AM - 4:00 PM EST
• Limited weekend availability

Front disc brakes for your 1959-64 Impala or Bel Air, on your factory spindles. Order your DBK5964 from Pirate Jack today.