GM Rear Disc Brake Hardware Kit

 DBK1012HWK – Rear Disc Brake Caliper Bracket & Hardware Set | GM A, F & X-Body 1964–1980

The foundation of a solid rear disc brake conversion.

Every good rear disc swap starts with brackets that mount everything in the right place. The Pirate Jack DBK1012HWK set gives you the caliper mounting brackets and hardware you need to mount rear disc brakes on GM A, F and X-Body cars from 1964 to 1980. It fits most GM 10-bolt and 12-bolt passenger car rear ends.

The brackets are cut from heavy steel plate and mount solidly to the axle flange, holding your calipers square to the rotor for even pad wear, smooth operation and consistent stopping. The kit includes the axle flange plates and grade hardware, so you aren’t stuck piecing together brackets and bolts from different sources.

It’s a smart choice if you’re building your own rear disc setup with your choice of rotors and calipers, or replacing worn or missing brackets on an existing conversion.

What’s in the DBK1012HWK Set

• Left and right caliper mounting brackets
• Axle flange mounting and spacer plates
• Mounting bolts, nuts and washers
• Brake hose retaining clips

Rotors, calipers, pads and brake hoses are not included.

Fitment

• GM A-Body, F-Body and X-Body cars, 1964–1980
• Fits most GM 10-bolt and 12-bolt passenger car rear ends
• Popular applications include the Chevelle, El Camino, Malibu, Camaro, Nova, Cutlass and 442

⚠️ Pontiac and Buick owners, please note: This set will not work on Pontiac or Buick rear ends without modifying the axle flanges. Give us a call before ordering if you have one of these cars.

Questions? Give us a call! The Pirate Jack team knows brakes and can help you confirm your rear end and choose the right rotors and calipers for your build. Call us at 866-601-4455.

Build your rear disc conversion on a solid foundation. Order your DBK1012HWK from Pirate Jack today.