1975-81 Camaro Rear Disc Brake Conversion Kit Black Calipers Staggered Shocks

Item DescriptionThe 2nd Gen Camaro (1975-81) rear disc brake kit  provides an easy to install, bolt on solution for upgrading your Cars 10 or 12 bolt rear-end to disc brake performance. This kit will dramatically improve your stopping performance from drums to 11" gas vented and drilled rotors! Staggered rear ends means one shock is positioned toward the front of the car and one shock is positioned toward the back of the car. This means you will get two of the same caliper brackets and two of the same calipers. You will not receive a left and a right caliper. If you don't have staggered shocks do not purchase this kit.Complete Rear Disc Kit Includes:      Multi-Pattern 11" Drilled & Slotted Rotors     Large GM BLACK POWDER COATED Calipers with built in emergency brake (originally off of 1979 Cadillac Eldorado)     Pads Included     Caliper Brackets & Spacers     Bracket Hardware for Staggered Shocks     Stainless Steel Braided Hoses     Caliper Brackets     Emergency Brake Cables     Works on C-Clip or non C-Clip rear ends.     Each rotor is drilled for GM 5 x 4.75'' w/ 7/16'' stud bolt patterns.     ALL NEW PARTS, NOTHING REBUILT OR RE-MAN!!     Fits F- body GM Vehicles, Camaro, Firebird passenger car with a 10/12 bolt pattern & staggered shocks.MUST USE 15" OR LARGER RIMS!   All disc brake kits will move your rim out toward the fender of the car up to 3/4" depending on your style rims. It is hard to say how much total offset it will be asall rims are not standard.Additional Parts Needed:You will need a larger bore master cylinder and a disc/disc proportioning valve. Now is a great time to inspect your parts that are on the vehicle and replace the booster with a new 11" Delco Moraine Power Brake Booster. The unit is also designed for disc/disc brakes and will be a great addition to your2nd Gen Camaro.