1970-1974 Camaro Rear Disc Brake Conversion & Power Brake Master Kit for Disc Disc

Want to convert your rear drums to power disc? This kit is the one! Drilled/Slotted rotors, powder coated calipers & correct length e-brake cables. Pair the disc brake kit with a massive power 11" booster & new master cylinder and you'll be stopping on a dime!

The 2nd Gen Camaro Kit  provides an easy to install, bolt on solution for upgrading your Cars 10 or 12 bolt rear-end to disc brake performance.This kit will dramatically improve your stopping performance from drums to 11" gas vented and drilled rotors!


Staggered rear ends means one shock is positioned toward the front of the car and one shock is positioned toward the back of the car. This means you will get two of the same caliper brackets and two of the same calipers. You will not receive a left and a right caliper. If you don't have staggered shocks do not purchase this kit.


Complete Rear Disc Kit Includes:

• 11" Delco Moraine 2nd Gen Power Brake Booster
  
  
• Square Single Bail Master Cylinder w/ Bleeder Screws
  
  
• Disc/ Disc Brass Proportioning Valve w/ Brackets & Lines
      
• Multi-Pattern 11" Drilled & Slotted Rotors

•     Large GM BLACK POWDER COATED Calipers with built in emergency brake     (originally off of 1979 Cadillac Eldorado)
  

•     MKD84 Pads Included

•     Caliper Brackets & Spacers

•     Bracket Hardware for Staggered Shocks

•     Stainless Steel Braided Hoses

•     Caliper Brackets

•     Emergency Brake Cables

•     Works on C-Clip or non C-Clip rear ends.

•     Each rotor is drilled for GM 5 x 4.75'' w/ 7/16'' stud bolt patterns.
  
•     ALL NEW PARTS, NOTHING REBUILT OR RE-MAN!!

•     Fits F- body GM Vehicles, Camaro, Firebird passenger car with a 10/12 bolt pattern & staggered shocks.
  
  MUST USE 15" OR LARGER RIMS!