1966-76 Dodge Dart Front Power 12" Disc Brake Conversion Kit, Red PC Calipers

• 12" Drilled & Slotted Rotors with 5x4.5 Bolt Pattern  
• Loaded Large Calipers with Red Powder Coated Finish
• Backing Plates
• Stock Height Spindles
• 7/16 Stainless Steel Braided Brake Hoses
• Bearings/ Seals / Dust Caps &  all Hardware
• Lower Ball Joint & Steering Arm Replacements

** NOTE*** The brake booster conversion will be a tight fit. Depending on what has been done to your engine over the years you may need to move the windshield washer fluid tank and re route those lines. The stock air filter that came with the v6 engines is a haus and you may need to convert to an aftermarket air cleaner to be able to get the clearance you need to install the kit. IT WILL BE TIGHT but can be done. The booster conversion kit is not OE style and is an after market product. The brake line tube nuts will not automatically screw in to the master cylinder and adapters will be needed. Our suggestion is to splice in a jumper line from the old location of the manual master cylinder on the firewall and run the lines the 15.5" inches you need to make it to the master. With a little work you will have power brakes on your A body but it will take some patience and willingness to work with the bracket. If you have a larger battery than what came stock with your car the unit may be 1" too long and may need to get a smaller battery to get the unit to fit.

If you are looking for a drop in unit with no modifications to your system:
A. You won't find it & B. This won't be the kit for you.

All this being said you will have power brakes and a great disc brake kit and the satisfaction of knowing you and your family are safer and able to brake on a dime!

***NOTE This is a Slant 6 complete with AC.
Fitment should be much easier if you have the V8

***Kit comes complete with everything you need to change over your drum brakes to disc!