DBK64721012LX-GM-330 - 1964-1972 GM A Body Front & Rear Power Disc Brake Conversion Kit Drilled & Slotted Rotors w/ 8" Dual Chrome Booster Kit

1964-1972 GM A Body ( Chevelle, GTO, Cutlass) Front Disc Brake Kit includes:

• Stock Height spindles
• Front Vented 11" rotors 5"x4.75" w/ 7/16" studs
• Dust caps
• Inner & outer bearings, seals, & mounting hardware
• Front caliper brackets
• Backing Plates
• Front rubber brake hoses
• Large GM single piston calipers pre-loaded with pads

Must use 15" or larger rims.

Complete Rear Disc Brake Conversion Kit Includes:

• Rear 11" Vented GM Rotors Multi Pattern
• Fits 5x4.75" w/ 7/16 Studs & 5x4.5" w/ 1/2 Studs 
• Large GM Large Bore Single Piston Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado) 
• D54 Pads Included
• Caliper Brackets & Spacers
• Bracket Hardware
• Rubber Brake Hoses Hoses & Clips
• Emergency Brake Cables

Tech Notes:

• Does not fit S-10 Chasis or truck frames
• Maxiam diameter of 6.11" to fit rotor hat.
• .050x45 Degree Chamfer
• 2.786" max register axle
• Does not Fit 14" Rims Must use 15" or larger
• When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder will be needed.

1964-1972 GM A Body (Chevelle, GTO, Skylark)

• 8" Dual Chrome Power Brake Booster
• Aluminum Chrome Master Cylinder
• Disc/ Disc Chrome  Proportioning Valve
• Left Mount Proportioning Valve Kit (2) 3/8"-24 For Front Brakes  & (1) 9/16"-18 For Rear Brakes
• Valve bracket, stainless steel lines, & brake light warning switch, mounting hardware
• Angle firewall brackets
• Pedal rod extension & clevis