1962-74 Dodge Dart Mopar A-Body Front Disc Brake Conversion Kit for 5x4.5 Bolt Pattern & Manual Brakes

1962-74 Dodge Dart Mopar A-Body Std. Manual Master Front Disc Brake Conversion Kit for 5x4.5 bolt pattern. Allows you to maintain your stock upper control arms, saving your time & money! Our proprietary kit includes a special adapter/sleeve that will allow you to keep your stock arms. We also provide you the lower ball joints to change out, making this as complete a kit as possible. Also included is a period correct 4 bolt Bendix style manual master cylinder, linkage and push rod, and adjustable proportioning valve.

Complete Disc Brake Conversion Contains:

• 11" Rotors Standard Rotors, 5x4.5 Bolt Pattern
• New Single Piston Mid 70's Mopar Calipers, Slider Type
• D84 Brake Pads
• Robber Flex Line Hoses 
• Upper Crush Ball Joint Adapter Sleeves 
• Lower Ball Joints
• Hubs, Backing Plates
• Stock Height Spindles
•  Bearings, Seals, Dust Caps
• Spindle Nuts, Spindle Washers and all Hardware.
• Bendix Style; Near identical to original 2225621 with correct lid inscription 
• Manual Master Cylinder Rod Kit Included

Fit's Most 14" Wheels. This kit will not fit the skinniest or most narrow 14" wheel that Mopar ever made. The measurement requirement are a minimum 13.25" overall inside diameter with at least a 4" backspacing. Anything less than that will not allow the calipers to clear the wheel. It's your responsibility to measure and know before ordering! Buyer is responsible for return shipping and 15% restock fee for any kit returned.