Site Information

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9

1964-67 A-Body Ride Height Adjustable Front Coil Overs & Tubular Arms

Free Shipping. Faster Options Available At Checkout.


Product Description

High Quality 1964-1967 GM Upper   Front Tubular Control Arms Set. Fits all GM A-Body Cars from 1964 through 1972

Complete Upper Control Arm Sets with chrome cross shafts, bump stops, polyurethane bushings & ball joints, dust boots, castle nut set. Lower Control Arm Set comes complete with polyurethane bushings, ball joints, dust boosts, castle nut set, grease fittings, bump stops, and deep spring pockets. Can be used with coil over or standard shocks. 

We will need your year make and model to process. We also need to know what size engine so we can make sure the right spring load is shipped out.


  •     Black Powder Coated Front Tubular Steel, stronger than the factory arms    

  •     4 Piece Tubular Upper & Lower Control Arm Set
  •     High Quality, Greesable, Delrin Bushings   
  •     The upper arms have 4 degrees of positive caster, lowers are stock

  •     These will work with stock/standard coil springs and even coil over
  •     Standard Ball Joints Included

  •     Polyurethane Bushings & Urethane bump stops  

  •     Sway Bar Linkage
  •     Offset Billet Cross Shafts
  •     Clean welding and High Quality Powder Coating 

  •     Direct bolt on for cars with disc brakes, no modifications

  •     Recommend for Stock Height Spindles Only
  •     Sold as complete set 
  •     Inner Coil Retainer Design with Spring Pad Cushion (be sure compare to competition, some do not offer this)

  •     Replacement ball joints can be purchased later. Please use  (Replacement Ball Joint Moog#'s: Uppers : K-5108   Lowers: K-5103)

  • Convert your  GM suspension to fully ride-height adjustable coilovers. Aldan Phantom Series, single adjustable coilovers deliver superior handling & ride quality for a drastic improvement over stock suspension. Aldan’s High tensile coil-springs are designed as a direct fit into the factory upper spring pockets. Ride-height adjustable allows ride-height adjustment up to 3.0 Great for street or race applications.

    • Adjustable Ride Height: Single Adjustable Yes
    • Single Adjustable Coilovers
    • Front Spring Rate: 450 lbs./in. 0.5"-3"
    • Coilover Kit Position: Front 
    • We will need to know if you are installing or have a small or big block to have the correct load rate for your springs.

Other Details

Upper Control Arm Tubing:
1.125 OD - .125 wall DOM tubing
Lower Control Arm Tubing:
1.625 OD - .156 wall DOM tubing
Yes Single
Front Spring Rate:
450-550 lbs./in. 0.5"-3"

Find Similar Products by Category

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!