Close

Site Information

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10

1965-1972 Mopar C Body Front Disc Brake Conversion Kit & Manual Master Cylinder for Drum Spindle

$1,059.00
SKU:
140-15196-260-4893
Shipping:
Free Shipping. Faster Options Available At Checkout.
Quantity:

Reviews:

Product Description

Forged Dynalite Pro Series Front Brake Kit & Manual Master Cylinder Kit w/ Adjustable Vavle

Wilwood's new Pro-Series Front Hub Kits for Chrysler, Dodge & Plymouth 1965-1972 C-Body vehicles with drum brakes, offer disc brake upgrade solutions for OEM Drum spindles. We have completely redesigned our Pro Series line of brake kits using a larger 11" rotor and new forged aluminum hubs with the express purpose of maintaining the factory wheel position. This new kit offers an upgrade to 4 piston caliper with no offset change over the original disc brake positioning. Based on the venerable forged billet Dynalite caliper, these versatile kits are easily optioned to suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast. Most vehicle applications require no modifications for installation, and provide plenty of clearance inside popular 15" wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders. Kits come complete calipers, rotors, hub assembly, brackets and hardware. Requires purchase of additional brake lines shown below.

 

These kits require at least 15" diameter wheels.

 

Kit includes parts for both front wheels:

 

  • .810" Thick x 11.00" O.D. Rotors
  • Forged Dynalite 4 Piston Calipers - Black
  • Caliper Mounting Brackets
  • BP-10 Smart Compound Brake Pads
  • Hubs
  • Bearings, Seals, Washers, &
  • All bolts, washers, shims, & nuts necessary to install the complete braking system on both front wheels

 

 

Caution  THIS BRAKE KIT HAS AN HUB OFFSET OF: +.04
This Hub Offset will move the wheels inward or outward from the fenderby this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

 

Master Cylinder Kit Includes:

Adapter kit includes boot, pushrod, and adapts Wilwood master cylinder 260-4893 to Wilwood clutch/brake pedal bracket or other pedals with a 2.23" vertical mount centerline or a 3.22" horizontal mount centerline.
Aluminum construction with a black anodized finish. Complete with firewall mounting hardware, nuts, washers, bolts.

Made from durable lightweight aluminum with a large capacity plastic reservoir and dual outlet bores, this Chrysler-style master cylinder utilizes standard O.E.M. internal components. Standard factory mounting bolt holes can be adapted to racing pedal assemblies with an optional mounting adapter bracket 250-3677. This lightweight (2.5 lbs.) reliable master cylinder is used for drag racing, late model stock cars, street rod and off road applications. 

Has a 1-1/16" bore with 9/16"-20 inverted flare and 1/2"-20 inverted flare outlets. Included are two 3/16" brake line fittings that will require you to cut and reflare your brake line.

Specs

  • Mount bolt center to center spacing is 3.20"
  • Total length (to tip of push rod) is 12.42"
  • Length (mount surface to end of MC) is 8.14"
  • Push rod thread is 3/8"-24
  • Width (reservoir) is 3.61"
  • Overall height is 4.83"
  • 1-1/16" bore
  • Adjustable Valve w/ 3/8"-24 (Fittings Included)

 

-->

Find Similar Products by Category

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!